SMP Jacks (Female) Guide: Types, Structure, and Uses Explained

What Are SMP Jacks (Female)?

An SMP Jack (Female) is a high-performance, miniature coaxial connector engineered for high-frequency signal transmission in compact, high-density electronic systems. Unlike standard coaxial connector series where the male plug terminates onto the cable, the SMP series features a cable-mounted jack (female) interface that mates directly with device-mounted plugs, such as PCB Receptacles.

TYCLON's SMP Jacks (Female) support a standard characteristic impedance of 50 ohms and operate from DC up to 40 GHz. Constructed with a gold-plated beryllium copper body and a gold-plated beryllium copper female center contact socket, these connectors offer low contact resistance (a maximum of 6.0 milliohms at the center contact). All standard TYCLON SMP Jacks (Female) are fully compliant with international environmental regulations, including the Restriction of Hazardous Substances directive.

Search Our SMP Jacks (Female)

Mating of SMP Connectors

The mating of SMP connectors utilizes a push-on blind-mate coupling mechanism, allowing rapid interconnectivity in tight spaces.

The SMP Jack (Female) mates with an SMP Plug (Male), such as a PCB receptacle, which features a smooth bore (SB) or limited detent (LD) interface. When mating, the jack is pushed onto the plug. This blind-mate push-on interface accommodates slight misalignments, making it suited to high-density board-to-board, module-to-module, and rack-mounted RF assemblies.

SMP Jacks (Female) by Type

TYCLON's SMP Jacks (Female) are engineered primarily for cable termination onto small-diameter semi-rigid and semi-flexible coaxial cables, facilitating high-density interconnectivity across compact subassemblies:

Straight Jacks: Designed for direct linear coaxial cable termination, straight SMP jacks connect inline onto 0.047-inch and 0.085-inch semi-rigid and semi-flexible cables. They support frequencies up to 40 GHz, making them suited to internal microwave wiring and high-frequency test interconnects.

Right-Angle Jacks: Engineered for low-profile and space-constrained enclosures, right-angle SMP jacks allow cable assemblies to route at a ninety-degree angle relative to the mating interface. This right-angle design reduces bending strain on semi-rigid and semi-flexible cables and optimizes space utilization in ultra-compact electronic modules.

Trivia: Jacks vs Receptacles

Although standard RF connector series typically feature cable-mounted male plugs and panel-mounted female receptacles, the SMP connector series reverses this convention: SMP Jacks (Female) are designed specifically for coaxial cable termination, while plugs and PCB receptacles are mounted directly onto printed circuit boards.

PCB receptacles serve as fixed board interfaces, whereas SMP Jacks (Female) provide flexible cable-to-board interconnections across high-frequency microwave subassemblies.

Examples of SMP Jacks (Female) Usage

Because of their ultra-miniature form factor, blind-mate capability, and performance up to 40 GHz, TYCLON SMP Jacks (Female) are widely used in high-density and space-constrained applications:

Aerospace and Defense Avionics: Providing lightweight, high-frequency interconnections for airborne radar systems, satellite communication payloads, and military electronics.

Wireless Infrastructure and Telecommunications: Serving as compact interconnects inside high-density cellular base stations, phased-array antenna modules, and microwave transmission equipment.

High-Speed Test and Measurement Instruments: Facilitating reliable, high-bandwidth signal routing between internal subassemblies in instrumentation and RF testing devices.

Optical Networking Hardware: Enabling compact coaxial cable signal routing within high-speed optical transceivers and data center networking modules.

SMP Jack (Female) Cable Installation Guide

SMP Jacks (Female) are engineered for precise termination onto small-diameter coaxial cables, such as 0.047-inch and 0.085-inch semi-rigid or semi-flexible cables, establishing high-performance connections up to 40 GHz. To maintain RF performance and mechanical reliability, termination must be completed using specified assembly procedures.

1. Cable Compatibility Check
The SMP Jack (Female) must be chosen to match the exact coaxial cable type and outer diameter, such as 0.047-inch or 0.085-inch semi-rigid and semi-flexible cables. Using incompatible cables can compromise mechanical retention and degrade electrical performance up to 40 GHz.

For details on compatible cable specifications and custom cable assembly options, please refer to the product details on each TYCLON product page.

2. Connection of the Female Center Contact and Inner Conductor
The trimmed inner conductor of the semi-rigid or semi-flexible coaxial cable is inserted into the rear of the center contact of the SMP Jack (Female). This connection is typically secured by precise soldering to establish low contact resistance and uninterrupted high-frequency signal transmission.

3. Connection of the Connector Body and Outer Shield
The outer conductor (copper tube or braided shield) of the coaxial cable is joined securely to the connector body. For semi-rigid and semi-flexible cables, the outer conductor is soldered directly to the gold-plated body, providing a complete 360-degree shield connection, grounding, and high mechanical retention.

SMP Jack (Female) FAQs

QWhat does the name SMP represent for this coaxial connector series?

A

The letters SMP stand for Subminiature Push-on. These miniature push-on coaxial connectors were developed to provide high-frequency transmission in compact electronic assemblies.

QWhat are the standard impedance and frequency range of TYCLON SMP Jacks (Female)?

A

TYCLON SMP Jacks (Female) support a standard characteristic impedance of 50 ohms, indicating compatibility with most standard RF equipment, and perform reliably from DC up to 40 GHz.

QWhat primary structural materials are used in TYCLON SMP Jacks (Female)?

A

These connectors are constructed with a gold-plated beryllium copper body and a gold-plated beryllium copper female contact, offering low contact resistance.

QWhat coupling mechanism is utilized by TYCLON SMP Jacks (Female)?

A

The SMP Jack (Female) utilizes a push-on blind-mate coupling mechanism. This push-on design enables rapid interconnectivity in space-constrained hardware.

QDoes the SMP Jack (Female) mount onto coaxial cables or circuit boards?

A

Unlike standard connector series, the SMP Jack (Female) is engineered specifically for coaxial cable termination, whereas plugs and PCB Receptacles mount onto devices.

QWhat coaxial cable types are compatible with TYCLON SMP Jacks (Female)?

A

TYCLON SMP Jacks (Female) are designed to terminate onto small-diameter 0.047-inch and 0.085-inch semi-rigid and semi-flexible coaxial cables for high-frequency signal routing.

QWhat configuration styles are available for TYCLON SMP Jacks (Female)?

A

TYCLON offers straight and right-angle cable-mounted SMP Jacks (Female) in its standard product line, providing flexible routing for high-density microwave electronic subassemblies.

QHow does the blind-mate capability of SMP Jacks (Female) benefit complex systems?

A

The blind-mate push-on interface accommodates minor axial and radial misalignments, allowing blind mating in dense multi-channel, rack-mounted, and modular electronics.

QAre TYCLON SMP Jacks (Female) compliant with international environmental directives?

A

Yes, all standard TYCLON SMP Jacks (Female) comply with the Restriction of Hazardous Substances directive, and each SMP Jack product page carries the RoHS2 label.

QWhat applications commonly utilize TYCLON SMP Jacks (Female)?

A

They are widely used in aerospace avionics, satellite communications, cellular infrastructure, high-speed test equipment, and optical networking hardware requiring compact interconnects.

QHow does the right-angle SMP Jack (Female) route cables?

A

The right-angle design allows small-diameter semi-rigid and semi-flexible cables to route at a ninety-degree angle.

QHow can I order SMP Jacks (Female), and what support do you offer?

A

Ordering is simple—you can purchase our SMP Jack (Female) directly on our website or contact our sales team for assistance. We also provide full technical support, including datasheets, CAD models, and application notes, to help you pick the perfect connector for your project.

Purchase Guide

TYCLON coaxial connectors and processed coaxial cable products can be purchased directly online using a variety of credit cards.

View Purchase Guide